
Cargo density table
Typical cargo densities and how many cubic metres a 25 t load takes. Helps you judge what size of cistern you need.
Load calculator
Based on typical density. We confirm the exact quantity from the cargo specification.
Liquid cargo
| Cargo | Density, kg/m³ | Temperature | 25 t takes |
|---|---|---|---|
| Water (for comparison) | 998 | 20 °C | ≈ 25 m³ |
| Milk | 1,028–1,034 | 20 °C | ≈ 24 m³ |
| Wine | 990–1,000 | 20 °C | ≈ 25 m³ |
| Vegetable oil (sunflower, rapeseed) | 915–925 | 20 °C | ≈ 27 m³ |
| Animal fats (melted) | 880–900 | 60 °C | ≈ 28 m³ |
| Glucose syrup | 1,350–1,430 | 20 °C | ≈ 18 m³ |
| Sugar syrup (about 65 %) | 1,300–1,330 | 20 °C | ≈ 19 m³ |
| Liquid chocolate | 1,250–1,300 | 45 °C | ≈ 20 m³ |
| Oils and lubricants | 850–900 | 15 °C | ≈ 29 m³ |
| Biodiesel (FAME) | 860–900 | 15 °C | ≈ 28 m³ |
| AdBlue | 1,087–1,093 | 20 °C | ≈ 23 m³ |
| Monoethylene glycol | 1,113 | 20 °C | ≈ 22 m³ |
| Ethanol, bioethanol | 789 | 20 °C | ≈ 32 m³ |
| Methanol | 792 | 20 °C | ≈ 32 m³ |
| Acetone | 791 | 20 °C | ≈ 32 m³ |
| Diesel | 820–845 | 15 °C | ≈ 30 m³ |
| Petrol | 720–775 | 15 °C | ≈ 33 m³ |
| Sulphuric acid (96–98 %) | 1,835–1,840 | 20 °C | ≈ 14 m³ |
| Hydrochloric acid (30–33 %) | 1,150–1,165 | 20 °C | ≈ 22 m³ |
| Nitric acid (65 %) | 1,390–1,400 | 20 °C | ≈ 18 m³ |
| Bitumen | 1,000–1,050 | 15 °C | ≈ 24 m³ |
Dry bulk cargo (bulk density)
| Cargo | Density, kg/m³ | 25 t takes |
|---|---|---|
| Flour | 500–650 | ≈ 43 m³ |
| Sugar | 800–900 | ≈ 29 m³ |
| Grain (wheat) | 750–800 | ≈ 32 m³ |
| Polyethylene granules | 500–600 | ≈ 45 m³ |
| Cement | 1,100–1,400 | ≈ 20 m³ |
| Fertilisers (granulated) | 900–1,100 | ≈ 25 m³ |
| Animal feed (pellets) | 600–700 | ≈ 38 m³ |
Typical values only. The exact density is in the product specification or safety data sheet. A load of up to 25 t usually fits a 30–33 m³ cistern; light dry bulk needs a larger silo tank.
Have a load to move?
Tell us the route, the cargo and the tank requirements. We prepare a quote for your request.
Free tank truck?
We offer loads for your road tankers in many European countries. Partners value that we pay on time.
Frequently asked questions
How do I work out how much of a load fits in a road tanker?
Multiply the tank volume (m³) by the cargo density (t/m³). For example, a 30 m³ tank holds about 27.6 t of vegetable oil (30 × 0.92). Within the European Union a tank truck usually carries about 25 t.
Why does density depend on temperature?
A heated liquid expands, so its density falls. That is why calibrated tanks work out the quantity from volume, temperature and density.